|
|
| Intel® Core™2 Duo Processor-Based 3U Conduction- or Air-Cooled VPX-REDI Module
|
|
|
|
Features
|
 |
Intel® Core™2 Duo processor at up to 1.8 GHz
|
|
|
3U VPX module
|
|
|
OpenVPX standards based
|
|
|
Ruggedized Enhanced Design Implementation (REDI)
|
|
|
Conduction or air cooling
|
|
|
Up to 4 GB of DDR2-400 ECC SDRAM
|
|
|
Up to 2 MB firmware hub flash (or 1 MB with redundancy)
|
|
|
Up to 4 GB of NAND flash
|
|
|
XMC interface with rear- and front-panel I/O support
|
|
|
Two x4 PCI Express Fat Pipe P1 fabric interconnects
|
|
|
Two SerDes Gigabit Ethernet or 10/100/1000Base-T Ethernet ports
|
|
|
Two optional rear-panel USB 2.0 high-speed ports
|
|
|
Six optional rear-panel SATA ports
|
|
|
Up to two rear-panel RS-232/RS-422/RS-485 serial ports
|
|
|
Front I/O available via plugover module
|
|
|
Linux BSP
|
|
|
VxWorks BSP
|
|
|
QNX Neutrino BSP
|
|
|
Green Hills INTEGRITY BSP
|
|
|
Windows XP/Vista drivers
|
|
Description
|
| The XPedite7172 is a high-performance, low-power 3U VPX-REDI single-board computer based on the Intel Core 2 Duo processor. With two x4 PCI Express Fat Pipe P1 interconnects and two Gigabit Ethernet ports, the XPedite7172 is ideal for high-bandwidth data-processing applications.
The XPedite7172 accommodates up to 4 GB of DDR2 ECC SDRAM to support memory-intensive applications and hosts numerous I/O ports including Gigabit Ethernet, USB 2.0, SATA, and RS-232/RS-422/RS-485 through the P2 backplane connector.
The XPedite7172 can be used in either the system slot or peripheral slot of a VPX backplane. Linux, Wind River VxWorks, QNX Neutrino, and Green Hills INTEGRITY Board Support Packages (BSPs) are available, as well as Windows drivers.
|
Block Diagram
|
|
Processor
|
|
|
Intel Core 2 Duo at up to 1.8 GHz
|
|
|
Up to 200-MHz (800 MT/s) Front Side Bus
|
|
|
Up to 6 MB of L2 cache
|
|
Memory
|
|
|
Up to 4 GB of DDR2-400 ECC SDRAM
|
|
|
Up to 2 MB firmware hub flash (or 1 MB with redundancy)
|
|
|
Up to 4 GB of NAND flash
|
|
VPX (VITA 46) P1 I/O
|
|
|
x4 PCI Express Fat Pipe interface to P1.A
|
|
|
x4 PCI Express Fat Pipe interface to P1.B
|
|
|
Two SerDes Gigabit Ethernet ports (or one 10/100/1000Base-T port out P1 and one out P2)
|
|
|
X12d XMC P16 I/O
|
|
VPX (VITA 46) P2 I/O
|
|
|
One 10/100/1000-Mbps Gigabit Ethernet port (optional)
|
|
|
Six SATA ports (optional)
|
|
|
Two USB 2.0 ports (optional)
|
|
|
Up to two RS-232/RS-422/RS-485 serial ports
|
|
|
I²C port
|
|
|
3.3V GPIO signals (optional)
|
|
|
P64s PMC P14 I/O
|
|
XMC Site
|
|
|
x4 PCIe port
|
|
|
P64s P14 I/O support
|
|
|
X12d P16 I/O support
|
|
Front Panel I/O
|
|
|
Front-panel RJ45 Ethernet, USB, and mini-DB9 RS-232 serial ports available via optional plugover module
|
|
Software Support
|
|
|
Linux LSP
|
|
|
Wind River VxWorks BSP
|
|
|
QNX Neutrino BSP
|
|
|
Green Hills INTEGRITY BSP
|
|
|
Windows drivers
|
|
Physical Characteristics
|
|
|
3U VPX-REDI conduction- or air-cooled form factor
|
|
|
Dimensions: 100 mm x 160 mm
|
|
|
0.8-in. pitch without solder side cover
|
|
|
0.85 and 1.0-in. pitch with solder side cover
|
|
Environmental Requirements
|
|
|
Supported ruggedization levels (see chart): Level 1, Level 2, Level 3, Level 4, Level 5
|
|
|
Humidity: 0% to 95% non-condensing
|
|
Power Requirements
|
|
|
Maximum power consumption: 37 W (with 1.8-GHz processor), 28 W (with 1.2-GHz processor)
|
|
Related Products
|
|
