|
|
| XPedite7302: XMC Card with Intel® Core™i7 and FPGA
|
Description
|
| The XPedite7302 is a high-performance, low-power XMC module based on the Intel® Core™i7 processor and Intel QM57 chipset. With SecureCOTS™ capabilities, this card provides data encryption/decryption and enables developers to address a program's protection requirements. Each of the five external PCI Express interfaces and the Gigabit Ethernet port links can be controlled directly by the FPGA. The serial interface passes through the interface to allow the FPGA to control what data is passed externally to the CPU system.
The XPedite7302 uses NOR flash exclusively rather than any NAND based flash to further its long term data retention. Both the SPI NOR flash used for booting firmware and the parallel bus NOR flash are routed through the FPGA to allow for any type of user encryption on the data before it is presented to the CPU system. The parallel bus NOR flash is accessed via PCI with a DMA unit for efficient transfers from the NOR Flash to CPU system's memory.
The XPedite7302 is ideal for high-bandwidth data-processing applications in a secure environment. Wind River VxWorks and Linux Board Support Packages (BSPs) are available.
|
|
XPedite7302: XMC/PMC Module with Intel® Core™i7 XPedite7302: XMC Module with Intel® Core™i7 Processor and FPGA
|
Features
|
 |
Intel® Core™i7-610E, -620LE, and -620UE processors
|
|
|
Dual-core with hyper-threading technology
|
|
|
XMC module
|
|
|
Conduction or air cooling
|
|
|
SecureCOTS™
|
|
|
Up to 8 GB of DDR3-1066 ECC SDRAM in two channels
|
|
|
8 MB SPI NOR boot flash
|
|
|
256 MB parallel NOR flash
|
|
|
Hardware write-protection for flash
|
|
|
One x4 P15 PCI Express XMC interface
|
|
|
Four x1 P15 PCI Express XMC interfaces
|
|
|
Gigabit Ethernet port with integrated magnetics
|
|
|
Two RS-422/RS-485 serial ports
|
|
|
VxWorks BSP
|
|
|
Linux BSP
|
|
Block Diagram
|
|
Processor
|
|
|
Intel® Core™i7 processor operating at 2.53, 2.0, or 1.06 GHz
|
|
|
Dual-core with hyper-threading technology
|
|
|
Intel QM57 chipset
|
|
|
Integrated graphics controller
|
|
|
4 MB of shared cache
|
|
Memory
|
|
|
Up to 8 GB of DDR3-1066 ECC SDRAM
|
|
|
8 MB SPI NOR boot flash
|
|
|
Up to 256 MB parallel NOR flash
|
|
P15 XMC Interface
|
|
|
One x4 Gen2 at 2.5 GT/s PCI Express link
|
|
|
Four x1 Gen2 at 2.5 GT/s PCI Express links
|
|
|
One JTAG port
|
|
|
One I²C port
|
|
P16 XMC Interface
|
|
|
One 10/100/1000BASE-T Ethernet port
|
|
|
Two RS-422/RS-485 ports
|
|
Software Support
|
|
|
Linux LSP
|
|
|
Wind River VxWorks BSP
|
|
Physical Characteristics
|
|
|
XMC form factor
|
|
|
Dimensions: 149 mm x 74 mm, 10-mm stacking height
|
|
Environmental Requirements
|
|
|
Supported ruggedization levels (see chart) Level 1, Level 2, Level 3, Level 4, Level 5
|
|
|
Humidity: 0% to 95% non-condensing
|
|
Power Requirements
|
|
|
Maximum power consumption 20 W (1.06 GHz)
|
|
Related Products
|
|
