|
|
| Intel® Core™i7 Processor-Based 3U Conduction- or Air-Cooled VPX-REDI Module
|
Description
|
| The XPedite7470 is a high-performance, low-power 3U VPX-REDI single-board computer based on the Intel® Core™i7 processor (Sandy Bridge) and Intel QM67 (Cougar Point) chipset. With two PCI Express Fat Pipe P1 interconnects and two Gigabit Ethernet ports, the XPedite7470 is ideal for the high-bandwidth and processing intensive applications of today's military and avionics applications. Floating-point intensive applications such as radar, image processing, and signals intelligence will benefit from the performance boost provided by the Intel® Advanced Vector Extensions (Intel® AVX) incorporated into the Intel Core™i7 processor.
The XPedite7470 accommodates up to 8 GB of DDR3 ECC SDRAM on two channels to support memory-intensive applications. The XPedite7470 also hosts numerous I/O ports including Gigabit Ethernet, USB 2.0, SATA, graphics, and RS-232/RS-422/RS-485 through the backplane connectors.
The XPedite7470 can be used in either the system slot or peripheral slot of a VPX backplane. Wind River VxWorks, QNX Neutrino, Green Hills INTEGRITY, and Linux Board Support Packages (BSPs) are available, as well as Windows drivers.
|
|
|
Features
|
 |
Intel® next generation embedded Sandy Bridge processor
|
|
|
Dual- or quad-core processor with hyper-threading technology
|
|
|
3U VPX (VITA 46) module
|
|
|
OpenVPX™ standards based
|
|
|
Ruggedized Enhanced Design Implementation (REDI) per VITA 48
|
|
|
Conduction or air cooling
|
|
|
Up to 8 GB of DDR3-1333 ECC SDRAM in two channels
|
|
|
32 MB NOR boot flash
|
|
|
Up to 16 GB of NAND flash
|
|
|
PrPMC/XMC interface with rear and front panel I/O support
|
|
|
Two Gen2 Fat Pipe P1 fabric interconnects
|
|
|
Two optional 10/100/1000BASE-T or 1000BASE-BX Ethernet ports
|
|
|
Two optional rear-panel USB 2.0 high-speed ports
|
|
|
Two optional rear-panel SATA 3.0 Gb/s ports
|
|
|
Two rear-panel RS-232/RS-422/RS-485 serial ports
|
|
|
Two rear-panel DVI graphics ports
|
|
|
Linux BSP
|
|
|
Wind River VxWorks BSP
|
|
|
QNX Neutrino BSP
|
|
|
Green Hills INTEGRITY BSP
|
|
|
Windows drivers
|
|
Block Diagram
|
|
Processor
|
|
|
Intel® Core™i7 dual- or quad-core processor
|
|
|
Hyper-threading technology
|
|
|
Dual channel integrated memory controller
|
|
|
Integrated graphics controller
|
|
Memory
|
|
|
Up to 8 GB of DDR3-1333 ECC SDRAM on two channels
|
|
|
32 MB NOR boot flash
|
|
|
Up to 16 GB of NAND flash
|
|
Graphics
|
|
|
Integrated high performance 3D graphics controller
|
|
|
Two DVI-D or dual-mode DisplayPort
|
|
VPX (VITA 46) P0 I/O
|
|
|
I2C port
|
|
VPX (VITA 46) P1 I/O
|
|
|
x4 PCI Express Fat Pipe interface to P1.A
|
|
|
x4 PCI Express Fat Pipe interface to P1.B
|
|
|
Two 1000BASE-BX Gigabit Ethernet ports (or one 10/100/1000BASE-T port to P1 and one port to P2)
|
|
|
X12d XMC P16 I/O
|
|
VPX (VITA 46) P2 I/O
|
|
|
One 10/100/1000-Mbps Gigabit Ethernet port (optional)
|
|
|
Two SATA ports (optional)
|
|
|
Two USB 2.0 ports (optional)
|
|
|
Up to two RS-232/RS-422/RS-485 serial ports
|
|
|
3.3V GPIO signals (optional)
|
|
|
Two DVI graphics ports (optional)
|
|
PrPMC/XMC Site
|
|
|
32-bit, 33-MHz PCI bus (PMC interface)
|
|
|
x4 PCIe port (XMC interface)
|
|
|
Two 6.0 Gb/s SATA ports (XMC interface)
|
|
|
X12d P16 I/O support
|
|
Software Support
|
|
|
Linux LSP
|
|
|
Wind River VxWorks BSP
|
|
|
QNX Neutrino BSP
|
|
|
Green Hills INTEGRITY BSP
|
|
|
Windows drivers
|
|
Physical Characteristics
|
|
|
3U VPX-REDI conduction- or air-cooled form factor
|
|
|
Dimensions: 100 mm x 160 mm
|
|
|
0.8-in. pitch without solder side cover
|
|
|
0.85 and 1.0-in. pitch with solder side cover
|
|
Environmental Requirements
|
|
|
Supported ruggedization levels (see chart) Level 1, Level 3, Level 5
|
|
|
Conformal coating available as an ordering option
|
|
Power Requirements
|
|
|
40 W (2.53 GHz)
|
|
Related Products
|
|
