XPedite5140: AMC Module with Dual-Core MPC8641D

XPedite5140
---------------

Information
-
Description
- Block Diagram
- Technical Specifications

Downloads
- Datasheet PDF

Freescale Dual-Core MPC8641D Processor-based AMC Module (ATCA/µTCA) with Dual-Bank DDR2 and Quad Gigabit Ethernet

 


Features

Freescale MPC8641D processor with dual e600 cores at 1.0 to 1.5 GHz each
Dual-bank DDR2-400/533/600 SDRAM, up to 4 GB (2 GB per bank)
AMC.1 x1/x2/x4/x8 PCI Express at 2.5 GBauds per lane
Quad Gigabit Ethernet interfaces
32-256 MB soldered NOR flash
1-4 GB NAND flash
1 MB SSRAM
Dual SATA II over AMC
VxWorks BSP
INTEGRITY BSP
QNX BSP
Linux LSP

Description

The XPedite5140 is a single-width, mid-height Advanced Mezzanine Card (AMC) featuring the Freescale MPC8641D System-on-Chip (SoC) processor. The MPC8641D integrates two e600 PowerPC cores operating from 1.0 to 1.5 GHz each, two memory controllers supporting up to 4 GB total (2 GB each) of DDR2-400/533/600 SDRAM, an x8 PCI Express interface, four 10/100/1000-Mbps Ethernet interfaces, and a SATA II controller on an additional PCI Express port. With each e600 core supporting a dedicated DDR2 bank and Ethernet controller, the XPedite5140 is an optimal solution for packet-processing and general computing applications that demand high performance.
The XPedite5140 provides two Gigabit Ethernet interfaces routed to the front panel and two to the AMC backplane connector. The serial interfaces are accessible either through the front panel or through the AMC serial I/O. The XPedite5140 can be installed in MicroTCA (µTCA) hosts or AdvancedTCA (ATCA) carrier cards supporting x1/x2/x4/x8 PCI Express or Gigabit Ethernet. Local SSRAM provides low-latency memory to support shared-memory applications between the two cores as well as Ethernet BDs and packet memory. Support for up to 4 GB of NAND flash is also provided for storage needs.

Block Diagram

 


Processor

Freescale MPC8641D processor with dual e600 PowerPC cores
Two embedded e600 PowerPC cores at 1.0 to 1.5 GHz each
2.3 MIPS/MHz
32 KB L1 instruction/data caches per e600 core
1 MB L2 cache per e600 core
Integrated Floating Point Unit
Integrated AltiVec Unit
Integrated MMU
Dual DDR2-600 SDRAM controllers
x1/x2/x4/x8 PCI Express
Quad Gigabit Ethernet controllers
Dual UART serial controllers
Dual I²C controllers

Memory

Up to 4 GB DDR2-400/533/600 SDRAM (2 GB per bank)
32-256 MB surface-mount NOR flash
1-4 GB NAND flash
1 MB SSRAM
2 KB serial EEPROM

AMC

IPMI support
AMC.1 Type 8 lanes 4-11 x8 PCI Express
AMC.2 Type 2E lanes 0-1 Gigabit Ethernet interfaces
AMC.3 Type 2S lanes 2-3 SATA II interfaces
Dual Serial Channels

RTC

M41T00 I²C Timekeeper
60-hour clock retention

Front Panel I/O

Dual Gigabit Ethernet ports
Dual RS-232 serial ports
Link and activity LEDs

Software Support

VxWorks BSP
INTEGRITY BSP
QNX BSP
Linux LSP

Physical Characteristics

AMC form factor
Dimensions: 180.6 mm x 73.5 mm, 15-mm stacking height

Environmental Requirements

Operating temperature: 0 to 55 ºC (ambient)
Humidity: 0% to 85%
Storage temperature: -40 to 70 ºC

Power Requirements

+12.0V 2.5A 30W (estimated)