XPort3300: XMC Board with Dual 10 Gigabit Ethernet

XPort3300
---------------

Information
- Description
- Block Diagram
- Technical Specifications

Downloads
- Datasheet PDF

XMC Board with Dual 10 Gigabit Ethernet

Conduction- or Air-Cooled XMC with Dual 10 Gigabit Ethernet Interfaces

Description

The XPort9100 is a rugged, avionics level GPIO XMC module.

The XPort9100 provides eight independently configurable GPIO channels; each optically isolated. Each output is open drain and when active is clamped to the return line voltage; the output can support clamping a 0.3 Amp pullup. Each input has a +3.5 Volt switching threshold.

 

Features
Utilizes the Intel® 82599 Dual 10GbE controller
x8 PCI Express 2.0 VITA 42.3 P15 interface
Front panel or rear (P16) I/O
Dual SFP+ optical or single 10GBASE-T 10GbE front panel interfaces
Dual 10GBASE-T 10 Gigabit Ethernet rear (P16) interfaces
Conduction- or air- cooled
Linux BSP
VxWorks BSP

Block Diagram

 

Ethernet Controller

Intel® 82599 dual 10GbE controller

Front Panel I/O Options
Single 10GBASE-T 10GbE interface
Dual SFP+ optical 10GbE interfaces

Rear I/O Options
Dual 10GBASE-T 10GbE interfaces
X12d mapping per VITA 46.9

Configuration Options
Dual SFP+ front panel 10GbE ports (air-cooled only)
Single front panel and single rear (P16 I/O) 10GBASE-T 10GbE ports (air-cooled only)
Dual rear panel (P16 I/O) 10GBASE-T 10GbE ports (conduction- or air- cooled)

XMC VITA 42.3 PCIe
x8 PCI Express 2.0 interface

Environmental Requirements
Supported ruggedization levels (see chart): Level 1,3,5
Conformal coating available as an ordering option

Software Requirements
Linux BSP
VxWorks drivers available

Power Requirements
Estimated maximum power consumption: 20 W at 85°C thermal interface (with dual 10GBASE-T)